|
|
 |
BATTERY CHARGERS ( DC Power Supplies ) |
|
Technical Specifications ( Single Phase ) |
|
|
Input Voltage |
220 VAC / 230 VAC |
|
Input Voltage Tolerance |
± 15% |
|
Input Frequency |
50/60 Hz ; ±5% |
|
Protections |
Thermic - Magnetic Over current protection, Over voltage protection |
|
Power Factor |
> 0.8 |
|
OUTPUT |
|
Output Voltage |
12 VDC / 24 VDC / 48 VDC / 96 VDC / 110 VDC ; ±1% |
|
Charge Voltage Adjustment |
± 20% digital adjustable |
|
Boost Charge Voltage |
100 % to 120 % of Floating Output Voltage |
|
Nominal Output Current |
10 A / 20 A / 30 A / 50 A / 75 A / 100 A / 150 A / 200 A ( 0 - 100% Adjustment ) |
|
Maximum Output Current |
110% Inominal |
|
Output Ripple |
£ 1% rms AC Output Voltage Max |
|
Dynamic Response |
Less than 2 % of output voltage |
|
Output Protection |
Electronic short circuit / Over voltage / Reverse voltage protections |
|
DISPLAY PANEL |
|
Measurements |
Two 3 digits 7 - Segment Displays for Output Voltage and Current |
|
Led Indicators |
Boost Charging, Float Charging, Over Load, Charger Failure, Over Temperature and Input Power Ok. |
|
Buttons |
Timer Setting, Output Voltage Setting, Float Voltage Setting and Boost Voltage Setting |
|
GENERAL |
|
Alarm Contacts |
Normally open or closed at any failure |
|
Cooling
|
Forced by Internal Fan |
|
Isolation Voltage |
3750 VAC ( between output and chassis ) |
|
Efficiency |
> 88-90 % |
|
Operating Temperature |
-5 ºC - +45 ºC |
|
Relative Humidity |
5 % to 90 % non condensing |
|
Input/Output Connections |
Feed Through or Tab Connection Terminals |
|
Fuses |
Input, load and 3 pcs double pole thermic magnetic automat |
Not: Yukar?da belirtilen tüm bilgiler referans te?kil etmesi amac? ile verilmi?tir. Üçüncü ki?ilere bildirmeksizin de?i?tirme hakk? sakl?d?r. ©2007
AC/DC Electronic Systems Inc. |
Information Request
