|
|
|
Battery Chargers |
Battery Chargers are automatical
redressors/with
Microprocessing controlling / Output voltage, Output current,
High speed voltage and high speed charging time. The battery
chargers can be set to prefered values from digital panel / Stabilized
AC DC Battery chargers
do also have dry contact alert output with light
indicator.
Battery Chargers
Automation Alert ( Optional )
Earth contact fault protection key
/ Battery critical discharge level protection and alert
contact./ Network key contact and light alert indicator /
Battery charger alert / Load key alert contact and alert light/
Output low voltage alert contact and light alert indicator /
Output high voltage and light / Network absence alert contact
and light alert indicator/ Battery charger fault alert contact
and light alert indicator / Overload and alert contact key and
alert light indicator / over temperature alert contact and light
alert indicator.
|
Three Phase Rectifiers
|
AC/DC brand BC-Plus model is microprocessor controlled Battery Charger.
Battery charger is designed to meet both industrial and individual use. Beside its Battery charger usage, it can be used as a source of direct current power supply at the same time.
3 different charging features choice ;
* Classic IU charging chart (direct current power supply mode)
* IuIa 3 steps charging chart (3 steps battery charging mode)
* Quick charge - Tampon Charge (yada CHARGER BUMPER) Chart (Classic Battery charging mode)
Ability to choose the battery type that will be charged; ;
* Dry Batteries
* Wet Batteries
* Gel Batteries
The front LCD Display panel gives the feature of seeing all the data at the same time; Volts, Amps, Cell Voltage, Elapsed Time, and charge status is displayed.
The Over-current, Short circuit, Over Heat Protection, Battery failure, rectifier failure warnings messages are shown on the front panel and given by voice warning at the same time.
There is external circuit that transmits an external relay contacts in error conditions displayed on the front panel.
LED status indicators are illuminated as a warning in START, CHARGER BUMPER, V CONTROL, FLOW CONTROL, END OF PROCESS.
In the Battery charge mode; warning ( with sound and visual warning in the display ) if the battery is not stalled or Battery Heads opposite poles.
For informations >>>
Three Phase Rectifiers
|
|
|
|
Battery Chargers ( Single Phase )
|
Microprocessor Controlled DC Power Suppy
Operation according to constant voltage and current principle
Adjustable Boost and Nominal Charge Voltage
Adjustable Output Current
High Voltage Protection
Over Current Protection
Short Circuit Protection
Over Temperature Protection
Input Filter
Low DC Voltage Protection (LVD)- Optional
Alphanumerical LCD Display and Control Panel
Parallel Connection Availability- Optional
Control Panel
For informations >>>
Battery Chargers ( Single Phase )
|
|
|
|
Battery Chargers ( Three Phase )
|
Microprocessor Controlled DC Power Suppy
Operation according to constant voltage and current principle
Adjustable Boost and Nominal Charge Voltage
Adjustable Output Current
High Voltage Protection
Over Current Protection
Short Circuit Protection
Over Temperature Protection
Isolated Output by Transformer
Low DC Voltage Protection (LVD)- Optional
Alphanumerical LCD Display and Control Panel
Parallel Connection Availability- Optional
Adjustable Timer For Boost Charging.
For informations >>>
Battery Chargers ( Three Phase )
|
|
|
|
Eltek Valere Rectifier
|
The battery chargers of the PSR327 series are new developed primary switched mode rectifiers with a compact design and very high power density. This compact module enables a lot of new application fields in industrial environment especially on constricted installation facilities. All current standards for safety and EMC are fulfilled. The unit is equipped with a rearside connector ( backplane connection ). Additional modules can be installed into available slide-in slots during operation in order to increase the power. Up to 4 modules can be installed into a 19" module rack ( 3U )
The modules are available for delivery with the charging voltages of 24, 48, 60, 110 and 220VDC.
Special versions for NiCd batteries are available ( see the data sheets PSR327NC ).
For informations >>>
Eltek Valere Rectifier
|
|
|
|
MeanWell Battery Chargers
|
MeanWell Battery Chargers Features :
Controlled by microprocessor,
2/3/8 stage charging selectable on output panel (Note 4),
Universal AC input / Full range,
Built-in active PFC function PF>0.95,
Protection: Reverse Polarity / Short circuit / Over voltage / Over temperature,
Charger for lead-acid batteries,
3 color LED loading indicator,
2-Bank charger,
Temperature compensation function,
FAN on/off control (depends on charging current),
3 years warranty,
Built-in remote ON-OFF control
For informations >>>
MeanWell Battery Chargers
|
|
|
|
|