|
Analog Viskometreler
Analog dial reading
viscometer offers low cost solution for various quality control
applications.
Viscosity ( Fluidity ) is read via red pointer from the analog display. Via
a special table prepared by Brookfield Analog
real cP (centipoise) or mPa.s (miliPaskal sn) is precised.
According to the measurable viscosity range, It has been chosen
LV, RV, HA or HB model viscometers. |
|
|
|
Economical Viscometers
DV-E viscometers are the instruments which assemble the economical
gain via DV-E economical viscometers and practicability via
Brookfield perfection. Brookfield DV-E Viscometer is an apparel
which has set it’s standarts in Brookfield DV-E Viscometer
measurements criteria. It enables to easily change measurements
criteria;and is conrolled by pressing on some buttons or dialing the
buton. Thnks to it’s digital display, it ensures perfect lecture of
torque percentage and viscosity. It’s lifespan is quiet long with
production warranty.
|
|
|
|
DV-I+ Brookfield Viscometer
DV-I+ serie viscometer offers set buttons and digital display
advantage for % torque measurments. Therefore there is a 0-1 VDC
analogue output for torque percentage. It has sensible measurement
capability with 18 different spindle speed. All apparels are
delivered with spindle set and laboratory carrying bag.
|
|
|
|
DV-II+ Pro Brookfield Viscometers
Programmable DV-II+ Pro Viscometers, show measurement temperature
with standart heat prob in addition to all
DV-I+ parameters. It enables data transfer via RS-232 port.
Via special software, it has the ability to test by computer
controlling system and with extra apparels displays Shear Rate and
Shear Stres. All DV-II+ Pro Viscometers do have 54 different twist
speed. Now it can be controlled by RHEOCALC software, meantime
measurements datas can be stored and their graphic can be drawn.
DV-II+ Pro Viscometers
|
|
|
|
DV-III+ Programmable Rheometreler
DV-III+ Rheometers have 2.600 speed choices. (0.1 RPM-250 RPM). With
Rheocalc software it has computer based testing ability and it can
store on it’s own memory. With DV-II+ Pro it displays the fluidity
and the heat in the same time
and with required apparels these rheometers can display “Shear Rate”
and “Shear Stres”. They can be programmed with 4 row display
without getting connected to the computer. They can register
25 operating test current in 10 pcs. Once they get programmed, they
can accomplish all operations and once these rheometers get
connected to a printer machine,receive the output and save
automaticaly the data. They are delivered as one Rheometer carrying
bag, a laboratory leg, and a spindle set which fit selected fluidity
range.
|
|
|
|
KU-2 Brookfield Viscometers
Direct display in Krebs, gr, cPs units and KU-2 Viscometer paints
which enable perfect experience possibility for display and
measurement continuity. Cover materials, and similar materials (ink,
oil) are the primary test instruments. KU-2 Viscometers show Krebs
units with 0,1 KU resolution with their LED display and Gr value
with 1 gm resolution. Measurement
interval is between 40 and 141 KU; 32 and 1099 gm, 27 and 5274 cPs
with ±%1 and ±%0,5
repeatability. The filing facility is ensured by attaching a printer
device to the output, it’s light, easy to carry and is manufactured
according to the sector standarts. ( ASTM D562 )
|
|
|
|
CAP 1000 & CAP 2000 Series Viscometers
High Shear Rate (Shear Rate) Viscometers
CAP viscosimeter have been manufactured with high shear
rate(150-26.600 s-1).The primary application domains are paints,the
resins and the covering materials(sprays,brushes..).The most
suitable application areas are Quality Control or Observation and
Development domains which require fast and reliable measurements.(to
put the sample onto and to clean it to be ready to get measured is
done in just a very short period of time like 2 mins).It has been
chosen to make measurments amongst two temperature range.Low
temperature 5° and 75° C:;High temperature: 50° and 200° C. There 6
types of cones according to the fluidity measurement range.There is
always one spindle in every CAP viscosimeter unit.
|
|
|
|
Brookfield
Viscometers Model Selection Table |